Who this is for
- Home-decor importers
- Amazon lighting sellers
- Small hardware shops
What's inside
- 01 - Main Guide (34 pages, 13 chapters + 2 appendices): the whole stack, from classification to the file you keep.
- 02 - Compliance Checklist (printable): work it down before you ship.
- 03 - Document Templates: commercial invoice, packing list, supplier and forwarder emails.
- 04 - Landed-Cost Calculator (Excel): change the yellow cells, read the landed load.
- 05 - FAQ: the questions buyers actually ask, each answer points to a chapter.
- 06 - README: what each file is for and where to start.
HS code and duty
HS code: 8539.52.00 — LED light sources / lamps (example; verify HTS/TARIC). Fixtures/luminaires may instead be 9405.11 or 9405.21. The first 6 digits are the same worldwide. The last 4 digits change from country to country.
Duty and landed cost: Customs duty and VAT treatment depends on the commodity code, origin, and any applicable relief or preference. Check the current UK Trade Tariff for the product-specific duty and VAT treatment. Where import VAT applies, its taxable value includes customs value plus relevant duties, charges, and incidental costs. Eligible businesses may be able to use postponed VAT accounting under HMRC rules.
Compliance you may need
- Electrical safety and electromagnetic compatibility — UKCA or CE marking.
- UK REACH limits for hazardous substances in electronics.
- UK energy-efficiency requirements for the product category for the market you are importing into.
- Dimmable / colour-temperature claims need supporting test data.
Common mistakes to avoid
- Confusing lamp (8539.52) vs luminaire/fixture (9405) classification and paying the wrong duty.
- Missing the energy-efficiency registration for your market — a common reason goods are held or refused at the border.
- Skipping hazardous-substance compliance and getting blocked at your market's border.
- Claiming 'dimmable' or a lumen output the product cannot meet — a labelling-compliance risk.
- Forgetting the EMC/EMI testing for driver circuitry, which your market requires.
What you'll learn
- The Bulb Pays Nothing, the Batten Pays 4%
- Two Chapters, One Line of Light
- The Strip Light Reversal
- The Material Menu on 9405
- Parts, Drivers, and Two Suspensions
- What Flips the Code
- China Pays, and Almost Nobody Else Does
- The Twenty Per Cent and the £135 Wall
- Voltage Decides Who Must Mark
- The Plug Is a Product of Its Own
- Smart Bulbs Open a Second Rulebook
- You Are the Producer Now
- One Consignment, End to End
Frequently asked questions
Do I need both a safety mark and an energy efficiency file for an LED bulb?
Yes, and they are separate tests. Electrical safety covers the fitting and the risk of shock or fire; energy efficiency covers how much light you get for the power. A bulb can pass one and fail the other, so ask for both files for the exact model and keep them with your shipment papers rather than assuming one covers both.
Is a UKCA mark needed for a light bulb, or is CE enough?
For Great Britain, CE is currently a valid route into the market because the UK has accepted it indefinitely for most product categories (verify at gov.uk, since this has changed more than once). UKCA is the alternative rather than the replacement, and the two are not interchangeable outside their own markets. Northern Ireland is different again and follows EU rules.
Do I need to register for WEEE as a lighting seller?
Possibly. Electrical equipment placed on the UK market falls under the WEEE Regulations, and under 5 tonnes a year you can register directly as a small producer while above it you need a compliance scheme (verify at gov.uk). Note the register for the bulbs is separate from the one for the packaging, because they are different waste streams under different rules.
Does the base type of the bulb affect anything beyond the fitting?
For your customer it matters enormously — a screw base and a pin base are not interchangeable, and buying the wrong one is the most common reason a lighting order sits unsold. For customs it barely registers; light sources are classified together. So specify the base and the voltage clearly to your supplier before you order, and put the actual type in your listing photos.
Does an LED light need certification?
Yes — electrical safety, hazardous-substance limits and energy-efficiency rules all apply. Ask your supplier which programmes they already hold a file for in your market.
What HS code do I use?
Usually 8539.52 (LED lamps). Confirm with your broker.
Is RoHS required?
In most markets, yes — it limits hazardous substances. Ask the factory for the declaration covering your market.
Do I need an energy label?
In many markets, yes — light sources can need an energy label before they can be sold. Check whether yours does, and get the label if it does.
Do I need UKCA or is CE enough for the UK?
Since 2024 the UK accepts CE marking for many products sold in Great Britain, so a valid CE mark is currently a legitimate route into the UK (verify at gov.uk, as this has changed more than once). UKCA is Britain's own mark and the relationship is one-way: a UKCA mark does not get you into the EU. Northern Ireland still follows EU rules and needs CE.
How much is UK VAT and when do I pay it?
The standard UK VAT rate is 20%, but reduced rates or reliefs may apply. Import VAT is generally calculated on customs value plus applicable duties, charges, and relevant incidental costs. For qualifying low-value goods sold to UK consumers, the seller or marketplace may account for VAT at sale; customs-duty relief currently applies to many non-excise consignments at or below £135, subject to scope and announced reforms. Check current HMRC guidance and the Trade Tariff for your goods and route.