Who this is for
- Accessory bundlers
- Amazon charging-gear sellers
- Small electronics shops
What's inside
- 01 - Main Guide (40 pages, 12 chapters + 2 appendices): the whole stack, from classification to the file you keep.
- 02 - Compliance Checklist (printable): work it down before you ship.
- 03 - Document Templates: commercial invoice, packing list, supplier and forwarder emails.
- 04 - Landed-Cost Calculator (Excel): change the yellow cells, read the landed load.
- 05 - FAQ: the questions buyers actually ask, each answer points to a chapter.
- 06 - README: what each file is for and where to start.
HS code and duty
HS code: 8504.40.90 — Static converters / power supplies (example; verify HTS/TARIC). The first 6 digits are the same worldwide. The last 4 digits change from country to country.
Duty and landed cost: Tariff treatment depends on classification and origin; check the current Australian Customs Tariff and any applicable free-trade agreement. For most consignments with customs value A$1,000 or less, customs duty and GST are not collected at the border, with exceptions including alcohol and tobacco. GST on low-value consumer imports may instead be collected at sale by the seller, an electronic distribution platform, or a redeliverer. Consignments above A$1,000 may incur duty, GST, and other import charges at the border. Confirm current rules with ABF and ATO.
Compliance you may need
- Electrical safety marks for your market — RCM and the Australian electrical safety rules.
- EMC/EMI compliance for your market.
- AICIS chemical restrictions for hazardous substances in electronics.
- the Australian equipment energy-efficiency programme (GEMS where applicable) for your market.
- If supplied with a cable, 8544.42 may also apply.
Common mistakes to avoid
- Missing the efficiency tier for your market — a frequent reason goods are refused or pulled from sale.
- Skipping the safety mark and being pulled aside at the border.
- Misclassifying as a generic 'adapter' instead of 8504.40.
- Forgetting EMC testing for switch-mode power supplies.
- Bundling with a cable and mis-declaring the combined item.
What you'll learn
- 1. Somebody Quoted You Five Per Cent
- 2. The Brick That Rectifies
- 3. The Cable in the Box
- 4. The Certificate Nobody Needs
- 5. Three Doors, None of Them Customs
- 6. Level Three
- 7. The Voltage the Buyer Cannot Choose
- 8. Eight Degrees of Pin
- 9. Ten Per Cent and Two Fees
- 10. The Words on the Box
- 11. Twenty Thousand Chargers
- 12. The First Forty Days
Frequently asked questions
Why is a wall charger in a higher risk level than other equipment?
The levels are about what happens if the product fails, and a charger is plugged into mains power and left running unattended (example; verify the level for your exact model). That combination puts it at the top, which is why a certificate from an independent body is required rather than just a registration.
Is registration enough, or do I need a certificate from someone?
For the top risk level you need both: a registration as a supplier, and a certificate of conformity issued by an accredited certification body (example; confirm the current requirement for your product). Budget for the certificate as a separate cost and a separate lead time — it is not issued instantly.
My charger has interchangeable pins. Does each version need registering?
Interchangeable pin sets are usually handled as one product with attachments, but the Australian configuration has to be in the set and covered by the certificate (example; confirm how your certifier treats travel kits). Selling a kit with no Australian pin is the common mistake here.
A charger with no mains plug, USB output only — same level?
Probably not. Without a mains plug the risk profile changes, and the product can fall outside the top level entirely (example; verify where your product sits before you assume). Describe the product to your certifier by what it plugs into, not by what it charges.
Does a charger need safety certification?
Yes — it is a power device. Look for RCM and the Australian electrical safety rules plus the energy-efficiency rules that apply in your market.
What HS code do I use?
Usually 8504.40 (power adapters). Confirm with your broker.
Is there an efficiency rule?
Efficiency rules apply to external power supplies in most markets — the level and the programme differ by country. Ask your supplier which programme they already hold a file for in your market, and certify accordingly.
Do I need a test report?
Yes — keep the safety mark and efficiency documents for your market on file.
Do I pay GST on imports to Australia?
Australia’s GST rate is 10%. For most consignments with a customs value of A$1,000 or less, GST and duty are generally not payable at the border (excluding alcohol and tobacco); GST on low-value consumer imports may be collected at sale by the seller, an electronic distribution platform, or a redeliverer. Consignments above A$1,000 may incur GST and duty at import. Check current ATO and ABF rules for your shipment.
What is RCM and do I need it?
The RCM is used for equipment covered by applicable Australian electrical safety, electromagnetic compatibility, or radio requirements. Whether it applies depends on the product and supplier obligations. Confirm registration, evidence, and marking requirements with the responsible regulator before supply.